Công ty TNHH công nghệ số Tân Thành

Thiết bị đo nhiệt độ tiếp xúc, FLUKE F51-II/F52-II/F53-IIB/F54-IIB, thermometer F52-2/F53-2B/F54-2B

  • Đăng ngày 09-11-2018 12:41:01 AM - 688 Lượt xem
  • Mã sản phẩm: FLUKE F51-II/F52-II/F53-IIB/F54-IIB

  • Tình trạng sản phẩm:


    Fluke 50 Series II Thermometer

    Fluke FLUKE 51-II/FLUKE 52-II/FLUKE 53-IIB/FLUKE 54-IIB Thermometer
    The rugged Fluke 50 II series of new contact hand-held thermometers provide fast response and laboratory accuracy (0.05% + 0.3°C).
     Fluke 50 II Series Features
    • Minimum, maximum, and average values ​​with relative time stamps, providing a time reference for the main event
    • Electronic compensation compensates for thermocouple errors and maximizes overall accuracy 
    • Measuring J, K, T and E type thermocouples
    • The unit of reading can be oC, oF or Kelvin (K)
    • Anti-leaching, dust-proof housing, impact-absorbing sheath
    • User-friendly front panel, easy to set up and operate
    • Sleep mode for extended battery life - typically 1000 hours
    • Replace the battery without breaking the calibration seal
    • Use the optional ToolPak accessory to hang the thermometer on any metal object (using a magnet) or on a pipe (using a nylon strap and buckle) to free up your hands
    • 3-year warranty
     
     In addition to all of the above features, the Fluke 53 II and 54 II series include the following features:
    • The dual display with backlight can display any combination of T1, T2 (52 and 54 models only), T1-T2 (52 and 54 models only), plus minimum, maximum or average
    • Supported thermocouple types are also R, S and N (a total of 7 different types)
    • The callback function makes it easy to observe the recorded data again on the display.
    • For further analysis and mapping, the infrared communication interface of the thermometer can be used to export the data to the optional FlukeView chart software.
    • Can record up to 500 points of measurement data, adjustable recording interval
     

    Technical Parameters
    Technical indicators
    Temperature accuracy
    Above -100 °C:  J, K, T, E, and N types: ±[0.05% + 0.3°C]*
       R and S type: ±[0.05% + 0.4°C]*
       
    Below -100 °C:  J, K, E, and N types: ±[0.20% + 0.3°C]*
       T type: ±[0.50% + 0.3°C]
       
    temperature range
    Type J:  -210 °C to 1200 °C
    Type K:  -200 °C to 1372 °C
    T type:  -250 °C to 400 °C
    Type E:  -150 °C to 1000 °C
    Type N:  -200 °C to 1300 °C *
    R and S type:  0 °C to 1767 °C *
    Temperature scale
       ITS-90
    Applicable standard
       NIST-175
    display resolution
       0.1 °C, 0.1 K < 1000
       1°C, 1 K >=1000
    Note
    *  Only the Fluke 53 II B and 54 II B thermometers can measure N, R and S type thermocouples
    Environmental parameters:
    Operating temperature
       -10 °C to 50 °C
    Storage temperature
       -40 °C to 60 °C
    Humidity (no condensation)
       0% to 90%; 0 °C to 35 °C
       0% to 70%; 0 °C to 50 °C
    Safety technical parameters
    Overvoltage category
       CSA C22.2 No. 1010.1 1992; EN 61010 Amendments 1,2
    Agency certification
       CE, CSA, TüV (pending)
    Mechanical and general parameters
    size
       173 mm L x 86 mm W x 38 mm
    weight
       400 g
    battery
       3 AA model batteries with a typical battery life of 1000 hours
    Model Name description
    Fluke 51-II Single input digital thermometers include:
    • Collision protection cover
    • An 80PK-1 bead probe thermocouple
    Fluke 52-II Dual input digital thermometers include:
    • Collision protection cover
    • Two 80PK-1 bead probe thermocouples
    Fluke 53-II/53-II B Single input digital thermometer with data logging capabilities, including
    • Collision protection cover 
    • An 80PK-1 bead probe thermocouple 
    The Fluke 53-II B communicates with the computer and FlukeView Forms software (FVF-SC2) via the USB port. The current Fluke 53-II model uses infrared (IR) and serial cable communication. This change makes USB communication the difference between the Fluke 53-II and the new Fluke 53-II B. 
    Fluke 54-II/54-II B Dual input digital thermometers include:
    • Collision protection cover 
    • Two 80PK-1 bead probe thermocouples 
    The Fluke 54-II B communicates with the computer and FlukeView Forms software (FVF-SC2) via the USB port. The current Fluke 54-II model uses infrared (IR) and serial cable communication. This change makes USB communication the difference between the Fluke 54-II and the new Fluke 54-II B.
         

     



    TÂN THÀNH CAM KẾT

    • Sản phẩm, hàng hóa chính hãng.
    • Giá cả cạnh tranh.
    • Dịch vụ chăm sóc khách hàng tận tâm.

    Thông Tin Công Ty

    Đã thông báo

     


    THÔNG TIN LIÊN HỆ:
    -------------------------------
    CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
    Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
    Kinh doanh 1 : 0816.861.515
    Kinh doanh 2 : 0836.861.515
    Kinh doanh 3 : 0926.511.515
    Kinh doanh 4 : 0916.861.515
    Kinh doanh 5 : 0888.868.515
    Kinh doanh 6 : 0917.971.515
    Website: http://tanthanh-automation.com
    Website: http://thietbitudongtanthanh.com
    Website: http://diencongnghieptanthanh.com
    Email: tthkinhdoanh@gmail.com
    Email: tthkinhdoanh01@gmail.com

  • Kết nối với chúng tôi