TÂN THÀNH
![]() ![]() | 091.686.1515 - 081.686.1515 |
![]() ![]() | 091.797.1515 - 083.797.1515 |
Thứ 2-6 : 8-17H; Thứ 7 : 8-12H | |
Hân hạnh phục vụ quý khách |
màng van ASCO SCXE353.060 3.0 inch,diaphragm repair kit ASCO SCXE353.060 3.0 inch
220/360k
màng van ASCO SCG353A051 2.5 inch,diaphragm repair kit ASCO SCG353A051 2.5 inch
200/300k
màng van ASCO SCG353A047 1.5 inch,diaphragm repair kit ASCO SCG353A047 1.5 inch
180/240k
màng van ASCO SCG353A044 1 inch,diaphragm repair kit ASCO SCG353A044 1 inch
Van điện từ ASCO SCG353A051 2.5" 24VDC-220VAC
Thông số kỹ thuật:
Mã số sản phẩm: ASCO SCG353A051
Điện áp sử dụng: 24VDC, 220VAC
Kích thước lỗ : 66mm
Thân van làm từ nhôm,bền bỉ với thời gian,chống gỉ sét kho tiếp xúc với môi trường bên ngoài
Lưu lượng dòng chảy tối đa: 92 (m3/h) - 1540 (l/min)
Khoảng áp suất cho phép hoạt động: 0.3 - 8.5 Bar
Lưu chất cho phép sử dụng: Không khí
Kiểu ren: G2 1/2
Van điện từ ASCO SCG353A047 1.5" 24VDC-220VAC
Thông số kỹ thuật:
Mã số sản phẩm: SCG353A047
Điện áp sử dụng: 24VDC, 220VAC
Kích thước lỗ : 52mm
Thân van làm từ nhôm,bền bỉ với thời gian,chống gỉ sét kho tiếp xúc với môi trường bên ngoài
Lưu lượng dòng chảy tối đa: 44 (m3/h) - 733 (l/min)
Khoảng áp suất cho phép hoạt động: 0.3 - 8.5 Bar
Lưu chất cho phép sử dụng: Không khí
Kiểu ren: 21
Van điện từ ASCO SCG353A043, SCG353A044 1" 24VDC-220VAC
ASCO serie 353 được thiết kế đặc biệt cho các ứng dụng thu gom bụi, kết hợp cùng với dòng chảy cao,van có ưu điểm tuổi thọ cao và đóng- mở cực kỳ nhanh nên rất chính xác và tiết kiệm năng lượng.
Van đi kèm với bộ phận giảm thanh để giúp giảm tiếng ồn và ngăn các hạt nước ổ bên ngoài xâm nhập vào van.
Working pressure: 0.2 ~ 0.8MPA Ambient temperature: -10-65 degrees Air relative to no more than 85% Working medium: clean air, Current: 800mA / 60mA Voltage: DC24v or AC220v
ASCO SCXE353.060 Asco 3-inch flanged electromagnetic pulse valve
This product is exported to more than 80 countries and regions all over the world every year. The product quality is absolutely guaranteed. If the product is not satisfied after receipt of the goods, it can be returned immediately.
product description:
1. ASCO SCXE Model 353.060 electromagnetic pulse valve is a diaphragm valve with particularly high performance. The valve body is directly mounted on the outer wall of the air bag.
2. This product is suitable for dust collectors, especially the reverse blow pulse cleaning system includes a variety of filter bags, filter cartridges, flat bags, ceramic tubes and metal fiber filter bags.
3. Procedure: Recommended pulse width: 50-500ms; recommended pulse gap: 1 minute or more.
4. Simple maintenance: Before system maintenance, ensure that all system components have been fully discharged and cut off until the valve is completely installed. The diaphragm and conductance pilot valve should be routinely inspected every year to keep it intact.
5. Installation method:
(1) The SCXE 353.060 valve is mounted directly on the flange seat of the outer wall of the air bag. After the blow tube crosses the air bag, it is installed in accordance with the Asco drawings .
(2) Match the proper injection tube and mounting parts according to the valve instructions, and try to avoid flipping the valve to the bottom of the air bag.
(3) If the valve is equipped with an outlet pipe and a bulkhead connector, the bulkhead connector is only used for sealing purposes and cannot be used as a structural support component. It is not possible to rely solely on bulkhead connectors to hold the injection tube and air bag. Both the blow tube and the air bag must be separately fixed.
(4) Tighten the bulkhead nut with a maximum torque of 20 Nm.
(5) Tighten the outlet pipe with a torque of 20 Nm.
(6) Connect the control wire to the terminal block of each electric control valve. Note that the inlet cannot be prevented upwards to prevent the inflow of rainwater. Or connect the air control valve and the electromagnetic assembly box through the street and a piece of nylon tube.
(7) Make sure the supplied compressed air source is clean and dry.
(8) Provide moderate air pressure to the air bag system and check for installation leaks (wash with soapy water and check for air bubbles on the interface).
(9) Pressure inflate the system (pressure range of the valve is 0.3~8.6 bar). It is recommended to inflate the air bag up to 8 kg.
(10) Test the injection sequence of the pulse valve, test whether all the pilot valves are operating properly, and whether the pulse injection sound is crisp.
6 . I provide the valve repair kits, including a diaphragm, coil, and so the pilot head. If you receive any product quality problems, please contact customer service, we will help you solve the problem for the first time.
Xuất xứ: China
Nhà sản xuất: Asco
THÔNG TIN THANH TOÁN
Bùi Mạnh Cường STK : 0031000284789 Vietcombank - Chi Nhánh Hải Phòng | Bùi Mạnh Cường STK : 79868269 Ngân hàng ACB Chi nhánh Trần Nguyên Hãn- TP Hải Phòng | Bùi Mạnh Cường STK : 19035178267018 Ngân hàng Techcombank- TP Hải Phòng |
------------------------------------------------------------------------------------------------------------------------------------------------------------- | ||
Nguyễn Thị Hồng Nhung | Nguyễn Thị Hồng Nhung STK : 108006540400 Vietinbank- Chi Nhánh Hải Phòng | Nguyễn Thị Hồng Nhung STK : 113375269 ACB - Chi Nhánh Hải Phòng |