TECO Taian Inverter A510 series
Mã sản phẩm: A510
Đăng ngày 24-12-2018 06:09:51 PM
Giá bán: Liên hệ

Inverter A510 series built-in PLC and brake unit , applicable to industries : high-speed punching, forging equipment, machine tools, rubber / plastic machinery, packaging machinery, road construction machinery, textile machinery, metal engraving machine, port machinery, oil field pumping unit and other equipment.

product manual:

 

 

Product introduction:

, six control modes: V / F control, V / F + PG , SLV , SV , PMSV , PMSLV .

, full range of built-in PLC , can be programmed.

, speed and torque control can be achieved.

, can receive ± 10v analog control speed.

, can install PG card to achieve pulse input / output.

, can monitor the status of I / O points.

7. You can check the status of the inverter when the fault occurs.

Product Features:

220V models

¾ Power range: 0.75 ~ 110KW single

3⁄4 input voltage: 200V ~ 240V

440V model

¾ Power range: 0.75 ~ 280KW three-phase

3⁄4 input voltage: 380V ~ 480V

, protection level : IP20

, international certification : UL, CE

 
 

TECO Taian Inverter N310 vector series
Mã sản phẩm: N310
Đăng ngày 24-12-2018 06:07:06 PM
Giá bán: Liên hệ

Design of high-performance 
using 32 bits CPU, high-speed processing and the internal large memory Improve the performance of the vector control Built- V / F. , Vector Control Follow current vector add / Close loop control Enhance stable operation of the low-speed torque and speed the degree of control high-speed response control high-capacity memory providing a large number of programs and parameters capacity provide the basis for the design of custom strengthen protection through high-speed computing enhance the stall prevention function so that the machine is not easy to trip

• High performance design

– Built-in more powerful application features

• 16 -speed + Sequence control + 16- segment Acc/Dec time adjustment

• RS485 communication function

– Standard built-in Modbus

– Profibus-DP, DeviceNet, TCP/IP communication card expansion

• PID function

• Multi-function DI/O AI/O function

• Built-in brake crystals for models below 15kw

• Environmentally friendly design

– Fans below 5.5kw are exposed to heat sink or fanless design

• 200V 1.5KW/380V 2.2KW fanless design

– Design of withstand voltage environment

• It can operate in 200-230V/380-460V +10%/-15% power environment and has special design for instantaneous low voltage protection making it easy to jump and operate normally.

• Unique over-voltage protection function effectively absorbing the regenerative energy of mechanical transient over-voltage ensuring the effective operation of the punch oil field boring machine

– Good Coating production to ensure the product is resistant to pollution

• Full range of control board drive version were Coating process to prevent damage caused by the pollution of the environment

assembly of simple structure ensure good shock resistance

N310 application

Woodworking machinery

Packaging Machinery

Food Machinery

Construction machinery

Stone machinery

Powder metallurgy machinery

Kiln industry and ceramic machinery

Chemical and mixing machinery

Commercial washing machine
 

TECO Taian Inverter E310 multi-function series
Mã sản phẩm: E310
Đăng ngày 24-12-2018 06:05:16 PM
Giá bán: Liên hệ

Product Features: High Performance Vector Control
Ultra low noise design, carrier 1~15KHz
With torque compensation function, it can start at 150% rated torque low frequency
Built-in PID control and easy positioning function
Acceptable 0~10VDC/0~20mA analog setting frequency
Two-stage acceleration and deceleration time and four- segment S- curve
Output frequency is 0.01~400.00Hz
With manual automatic energy-saving operation


Application:

Banding Machine

Feeder

Woodworking machinery (sand edge machine)

grinder

Packing Machine
Big round machine, etc.
 

Taian T-VERTER Inverter N2-SERIES
Mã sản phẩm: N2-SERIES
Đăng ngày 24-12-2018 06:01:09 PM
Giá bán: Liên hệ

Model Description: N2 Series Inverter
Product parameters:
Maximum applicable motor (HP) 0.5 ~ 30 HP · Output power rated output capacity ( KVA ): 1.2 ~ 36.6 KVArated output current ( A ): 3.1 ~ 4.8 A maximum output voltage ( V ): single / three phase 200V ~ 2 4 0V ·Three-phase 380V~460V maximum output frequency ( Hz ): can be set by parameters (up to 400Hz rated voltage frequency: single three phase 200~2 4 0V , 50/60Hz · three-phase 380~460V , 50/ 60Hz allowable voltage variation:
-15% ~ +10% allowable frequency change: ±5%

Product introduction:
· Output frequency up to 400HZ , can control high speed motor
· High starting torque
·18 fixed V/F curves, 1 arbitrary curve with conversion compensation function, providing 100 % -150% starting torque
· Comprehensive protection features
· 8 -speed control, which can be used with internal time setting to achieve sequential control
· 2- wire / 3- wire control
·Two- stage acceleration / deceleration time setting
·2 segment S curve setting
·3 segment skip frequency
· Automatic voltage adjustment ( AVR ) function setting
· Frequency upper / lower limit setting
· Control signal local remote switching function
 

N2-401-H3 N2-401-M3
N2-402-H3 N2-402-M3
N2-403-H3 N2-403-M3
N2-405-H3 N2-405-M3
N2-408-H3 N2-408-M3
N2-410-H3 N2-410-M3
N2-415-H3 N2-415-M3
N2-420-H3 N2-420-M3
N2-430-H3 N2-430-M3
N2-410-H3 N2-410-M3
N2-2P5-H3 N2-2P5-M3
N2-201-H3 N2-201-M3
N2-202-H3 N2-202-M3
N2-203-H3 N2-203-M3
N2-205-H3 N2-205-M3
N2-208-H3 N2-208-M3
N2-210-H3 N2-210-M3
N2-215-H3 N2-215-M3
N2-220-H3 N2-220-M3
N2-230-H3 N2-230-M3

Google Map
Liên hệ
  • Phòng kinh doanh
  • phonesp091.686.1515
  • phonesp081.686.1515
  • phonesp091.797.1515
  • phonesp083.797.1515
  • phonesptanthanhdigitech@gmail.com
-
 
  • Phòng kỹ thuật
  • phonesp0912.969.391
  • phonesp081.686.1515
  • phonesptanthanhdigitech@gmail.com
Lượt truy cập
  • Đang truy cập11
  • Hôm nay8,431
  • Tháng hiện tại95,639
  • Tổng lượt truy cập1,916,626


THÔNG TIN THANH TOÁN

Bùi Mạnh Cường
STK : 0031000284789
Vietcombank - Chi Nhánh Hải Phòng
Bùi Mạnh Cường
STK : 79868269
Ngân hàng ACB Chi nhánh Trần Nguyên Hãn- TP Hải Phòng
Công ty TNHH Công  nghệ số Tân Thành
STK : 0031000290374
Vietcombank - Chi Nhánh Hải Phòng

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Nguyễn Thị Hồng Nhung
STK : 0031000878687
Vietcombank - Chi Nhánh Hải Phòng

Nguyễn Thị Hồng Nhung
STK : 108006540400
Vietinbank- Chi Nhánh Hải Phòng
Nguyễn Thị Hồng Nhung
STK : 113375269
ACB - Chi Nhánh Hải Phòng
 
 
Trụ sở: số 189, Nguyễn Văn Linh, P. Kênh Dương, Q.Lê Chân, TP Hải Phòng
VPGD: Số 165-Thiên Lôi, P Vĩnh Niệm, Q Lê Chân. TP Hải Phòng
VPĐD: Số 191- P Chùa Láng. Q Đống Đa. TP Hà Nội
Tel: 0225.8830.305  Fax: 0225.8830.305

Bản quyền © 2018-2019 thuộc về tanthanh-automation.com

Ghi rõ nguồn khi sử dụng các thông tin tại WWW.TANTHANH-AUTOMATION.COM.

CÔNG TY TNHH CÔNG NGHỆ SỐ TÂN THÀNH
GPKD số 0201787027 do Sở KH và ĐT TP Hải Phòng cấp ngày 17/08/2017– GĐ/Sở hữu website Bùi Mạnh Cường
Địa Chỉ: Số 189 Nguyễn Văn Linh , P. Kênh Dương, Q. Lê Chân , Tp. Hải Phòng
bct
1. Chính sách quy định chung - 2. Chính sách bảo mật thông tin

Chat Zalo
Chat Facebook
vinades
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây