Graphic details
SWP-LCD-R small monochrome paperless recorder is an intelligent multifunctional secondary instrument suitable for detecting, controlling, recording and remotely transmitting various process constants.
| model | Code | illustrate |
| SWP-LCD- | □ | □ | □ | □□ | -□ | □ | □ | -□□ | /□□ | /□□ | -□ | □ | □ | -□ | -□ | -□ | Large screen LCD display instrument with backlight |
| Instrument function | R | | | | | | | | | | | | | | | | With recording function (omitted means no recording) |
| Dimensions | 8 | | | | | | | | | | | | | | | 160 × 80mm (horizontal) 80 × 160mm (vertical) |
| Input Channels | 1 2 3 | | | | | | | | | | | | | | Single channel Dual Three-way (the third way can only switch between voltage and current) |
| Control effect | 01 03 | | | | | | | | | | | | | Measurement records Three-position control |
| Communication | □ | | | | | | | | | | | | See "Communication Methods" |
| The first transmission output | □ | | | | | | | | | | | See "Transmission output mode" |
| Second transmission output | □ | | | | | | | | | | See "Transmission output mode" |
| First input type | □□ | | | | | | | | | See Input Type |
| Second input type | □□ | | | | | | | | See Input Type |
| The third input type | □□ | | | | | | | See Input Type |
| First alarm mode | □ | | | | | | See "Alarm Mode" |
| Second alarm mode | □ | | | | | See "Alarm Mode" |
| The third alarm mode | □ | | | | See "Alarm Mode" |
| Feed output | P | | | DC24V power supply output |
| Power supply | W T | | DC24V power supply AC85 - 260V (switching power supply) AC220V power supply (linear power supply, can be omitted) |
| Appearance characteristics | S | Vertical display instrument Horizontal display instrument |
Note: The third input can only be current or voltage.
★Communication method
| Selection code | 0 | 2 | 3 | 4 | 8 | 9 |
| Communication | No communication | RS-232 | Print port | RS-422 | RS-485 | Special specifications |
Communication protocol: SWP communication protocol is adopted when leaving the factory.If the user wishes to order a special communication protocol, please indicate this when ordering. ★Transmission output mode:
| Selection code | 0 | 2 | 3 | 4 | 5 | 8 |
| Output method | No output | 4 ~ 20mA | 0 ~ 10mA | 1 ~ 5V | 0 ~ 5V | Special specifications |
★Input type:
| Code | Input Type | Measuring range | Code | Input Type | Measuring range | Code | Input Type | Measuring range |
| 01 | B | 400 ~ 1800℃ | 09 | Pt100.1 | -199.9 ~ 320.0℃ | 17 | 30 ~ 350Ω | -1999 ~ 99999d |
| 02 | S | 0 ~ 1600℃ | 10 | Cu50 | -50.0 ~ 150.0℃ | 18 | Special specifications | User pending |
| 03 | K | 0 ~ 1300℃ | 11 | Cu100 | -50.0 ~ 150.0℃ | 19 | 4 ~ 20mA square root | -1999 ~ 99999d |
| 04 | E | 0 ~ 1000℃ | 12 | 4 ~ 20mA | -1999 ~ 99999d | 20 | 0 ~ 10mA square root | -1999 ~ 99999d |
| 05 | T | -199.9 ~32 0.0℃ | 13 | 0 ~ 10mA | -1999 ~ 99999d | twenty one | 1 ~ 5V square root | -1999 ~ 99999d |
| 06 | J | 0 ~ 1200℃ | 14 | 1 ~ 5V | -1999 ~ 99999d | twenty two | 0 ~ 5V square root | -1999 ~ 99999d |
| 07 | WRe3 ~ 25 | 0 ~ 2300℃ | 15 | 0 ~ 5V | -1999 ~ 99999d | twenty three | Full switch input | |
| 08 | Pt100 | -200 ~ 650℃ | 16 | 0 ~ 20mA | -1999 ~ 99999d | twenty four | Frequency input | 0~10KHz |
★To switch input, you only need to set the instrument configuration parameters. For details, see the "Instruction Manual". ★Alarm method:
| Selection code | N | H | L |
| Alarm method | No alarm (can be omitted) | Upper limit alarm | Lower limit alarm |