Biến tần, Danfoss Inverter FC360PK75HA2BXA0 three-phase 380- 480V 0.75KW

Characteristics

advantage

reliable

Maximum running time

The maximum ambient temperature is 50 ° C (the maximum temperature of full load without derating operation is 45 ° C)

Reliable operation in many environments

Coated PCB

Resistant to harsh environments

Unique thermal design without forced air cooling through electronic components

Unparalleled ruggedness, longest uptime

friendly

Reduce user commissioning and usage costs

Support for graphic LCP in English and Chinese

Easy to install

Enhanced Digital LCP

Easy to install

Application selection and guide

Easy to debug

Unloadable cooling fan

Quick cleaning for extended service life

Built-in DC reactor

Smaller power cable, reducing harmonics

Built-in EMC filter

Meet the grade C3

flexible

Energy saving

Automatic energy optimization

Save 5-15% energy and reduce operating costs

Built-in PID controller

No external controller required

Feedforward PID

Improve the stability of the workbench

Run by

Control deceleration during power failure to reduce material waste

Built-in brake chopper, up to 22KW

Save space and cost in the cabinet (no need to buy an external brake chopper)

specification

Main power supply (L1 , L2 , L3 )

Supply voltage

380-480V-15%/+10%

Power frequency

50/60Hz

Displacement power factor (cos)

Close (>0.98)

Input power L1, L2, L3 allow switching times

Up to 2 times per minute (0.37-7.5kW) 
up to 1 time per minute (11-7.5kW)

Output data (U , V , W )

Input voltage

0-100% of the power supply voltage

Output switching times

Unlimited

Acceleration time

0.01-3600 seconds

Frequency Range

0-500Hz

Programmable digital input (output)

Digital input (output)

7 (2 programmable to digital output)

logic

PNP or NPN

Voltage level

0-24V DC

Note: Two digital outputs can be programmed to be pulse output

Pulse/ encoder input

Pulse encoder input

1/2

Voltage level

0-24V DC

Note: One digital input can be programmed to pulse input. Two digital inputs can be programmed as encoder input.

Programmable analog input

Analog input

2

mode

Voltage or current

Voltage level

0V-+10V (can be adjusted)

Current level

0/4-20mA (can be adjusted)

Programmable analog output (can be used as a digital output)

Analog output

2

Current range of the analog output

0/4-20mA

Programmable relay output

Relay output

2

Current range of the analog output

0/4-20mA

Certification

CE, UL

Communication

FC protocol, Modbus RTU, Profibus (optional), ProfiNet (optional)