CEMS Bơm chân không, bơm lấy mẫu khí, sampling pump, PPJ14418-89 flue gas online monitoring analyzer vacuum pump

Sampling Pump PPJ14418-89 Instruction Manual

1. Adapt to the environment:

This product is used in the continuous analysis system of industrial process gas (extraction measurement) to extract gas. It has internal corrosion resistance and is particularly suitable for flue gas analysis. It can extract SO2, NOX, CO2, CO, N2, 02 and other gases.

2. Technical parameters:

(1) Model: Sampling pump PPJ14418-89

(2) Air extraction volume: 9.5 liters/minute

(3) Power supply: 220-230VAC 50HZ

(4) Interface: 1/8'' internal thread

(5) Pipe: $6 PTFE pipe

(6) Working pressure: Pmax: 0.5Bar

(7) Power: 60W

3. Installation method:

This product adopts panel installation, the installation hole spacing is: 48mm, 40mm. The installation hole size is: 4-05.

4. Daily maintenance:

This product is an oil-free diaphragm vacuum pump, which does not require oiling. If the inside is blocked or contaminated, please open the four screws on the top, clean the sealing gasket, and clean the pump membrane. If the contamination is serious, resulting in air leakage or insufficient air supply during sampling, the pump membrane needs to be replaced