Bộ điều khiển nhiệt độ XMT -101 102 121 122

Đăng ngày 30-08-2018 08:42:40 PM - 1037 Lượt xem

Mã sản phẩm: XMT -101 102 121 122

XMT series digital display regulator has many features such as high precision, good reliability, convenient installation, anti-vibration, strong anti-interference ability and low price. Alternatively variety of dimensions, comprehensive control, widely used in plastics, rubber, packaging, food machinery, and metallurgy, chemical industry, farming, etc. ... industries use, at -200C ° ~ 1800C temperature measuring period within a range of ° And automatic control, such as with the corresponding sensor can also be used for the display and control of pressure, flow, liquid level and other parameters. . . .

101 E 300
101 E 400
101 K 400
101 K 1000
101 K 1300
102 CU50 49.9
102 CU50 99.9
102 CU50 150
102 PT00 400
121 E 400
121 K 400
121 K 1000
121 K 1300
122 CU50 150
122 CU50 100

Tình trạng sản phẩm:

Second, the main technical instructions
The instrument accuracy is 1.0 , and the setting and display are less than or equal to +-1.0% F.S+-1 words.
Cold junction compensation error is less than or equal to + -2C[deg.], Less than or equal to a temperature coefficient of0.05% / [deg.] C .
Control point insensitive zone; less than 0.5% (finger control instrument).
Proportional adjustment; proportional band 2~5% , period30S+-10S (zero-crossing pulse period is about 1~2S )
PID regulation; output 0~10mA (or 4~20mA ), load resistance800 ohms (or 250 ohms). A zero-crossing pulse or phase-shiftingpulse with a pulse output amplitude greater than 3V and a width greater than 40uS .
Contact capacity: AC250/5A (resistive load) drives SSR ; drive current greater than 15mA no-load voltage greater than 9V , cycle about 2S .
Over limit alarm; input exceeds the set value + - 2~5% of full scale
Working power supply; 220V+-10% 50Hz power consumption is less than 5W
Working environment: non-corrosive gas with temperature 0~60 °C and relative humidity not exceeding 85% .
Third, the instrument appearance and opening dimensions are shown in the following table (unit mm )
<Attachment>
2 sets of mounting brackets, one manual, one certificate

(phase) feet connected to 220 volts,

(middle) the foot is connected to the 220 volt neutral line,

High, total, low feet are the first output, OUT main output

4, 5, 6 feet are the second output, AL1 alarm output

1, 2, 3 feet are connected to thermocouple or PT100 temperature sensor signals
1 is the positive electrode, 2 and 3 are the negative electrode
Three: the appearance size of the table and the size of the opening

model	High profile	Surface width	Table box width	Table box height	Table depth	Opening width	High opening
XMT	160	80	150	75	130	152	76
XMTH	80	160	75	150	130	76	152
XMTA	96	96	91	91	125	92	92
XMTB	60	120	55	114	130	56	115
XMTB-H	120	60	114	55	130	115	56
XMTD	72	72	66	66	125	68	68
XMTE	48	96	44	91	100	45	92
XMTF	96	48	91	44	100	92	45
XMTG	48	48	44	44	100	45	45