- Bộ lập trình PLC, cáp lập trình
- Màn hình HMI
- Cảm biến, phụ kiện
- Biến tần, khởi động mềm
- Máy cắt, Aptomat, khởi động từ
- Thiết bị đo lường, bảo vệ
- Thiết bị công nghiệp, tự động hóa
- Thủy lực, khí nén, van công nghiệp
- Motor, Servo motor, Servo Amplifier
- Thyristor, Module, SCR, SSR, Diode
- Phụ kiện tủ điện và vỏ tủ điện
- Cáp điện, ống bảo vệ cáp
- Thiết bị điện trung thế, truyền tải
- Thiết bị chống sét, kim thu sét
- Dụng cụ cầm tay, dụng cụ tool
- ATS, UPS, tụ bù, cuộn kháng
-
Thiết bị ngành xi măng, thép, nhiệt điện
-
Thiết bị thanh lí-hàng tháo máy
Bộ nguồn Phoenix, Phoenix Power Module QUINT-PS/1AC/24DC/10, 2866763
product description
The QUINT POWER power supplyQUINT POWER circuit breakers provide maximum functionality and can be quickly thermally decoupled at six times the rated current, providing selective system protection and cost savings. Precautionary function monitoring ensures extremely high system availability because it can issue critical operating status reports before a fault occurs.
With the static power reserve POWER BOOST, heavy loads can be reliably started. The adjustable voltage covers all ranges between 5 V DC ... 56 V DC.
size
| width | 60 mm |
|---|---|
| height | 130 mm |
| depth | 125 mm |
| Spare terminal width | 122 mm |
| Spare terminal height | 130 mm |
| Alternate assembly view | 63 mm |
Environmental conditions
| Protection level | IP20 |
|---|---|
| Ambient temperature (running) | -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K) |
| Ambient temperature (debug type test) | -40 °C |
| Ambient temperature (storage/transportation) | -40 °C ... 85 °C |
| Maximum relative humidity allowed (operating) | ≤ 95 % (no condensation at 25 ° C) |
| Anti-interference | EN 61000-6-2:2005 |
| Installation height | 5000 m |
Tình trạng sản phẩm:
Input data
| Rated input voltage range | 100 V AC ... 240 V AC |
|---|---|
| 110 V DC ... 250 V DC | |
| Input voltage range | 85 V AC ... 264 V AC |
| 90 V DC ... 350 V DC (UL 508: ≤ 300 V DC) | |
| Maximum dielectric strength | 300 V AC |
| AC frequency range | 45 Hz ... 65 Hz |
| DC frequency range | 0 Hz |
| PE discharge current | < 3.5 mA |
| Electricity consumption | 2.2 A (120 V AC) |
| 1.3 A (230 V AC) | |
| 2.5 A (110 V DC) | |
| 1.2 A (220 V DC) | |
| Rated power consumption | 257 W |
| Shock surge current | < 15 A (typical) |
| Power failure bypass | > 36 ms (120 V AC) |
| > 36 ms (230 V AC) | |
| Input fuse | 10 A (slow blow, internal) |
| Choose the right fuse | 10 A ... 20 A (AC: Characteristics B, C, D, K) |
| Protection name | Transient surge protection |
| Protection circuit/component | Varistor, gas discharge tube |
Output Data
| Rated output voltage | 24 V DC ±1 % |
|---|---|
| Setting range of output voltage (U Set ) | 18 V DC ... 29.5 V DC (> 24 V DC, stable capacity limit) |
| Rated output current (I N ) | 10 A (-25 °C ... 60 °C, U OUT = 24 V DC) |
| POWER BOOST (I Boost ) | 15 A (-25 ° C ... 40 ° C constant, U OUT = 24 V DC ) |
| Selective fuse (I SFB ) | 60 A (12 ms) |
| attenuation | 60 °C ... 70 °C (2.5%/K) |
| Even | Yes, for redundancy and increased capacity |
| Concatenation | Yes |
| Control deviation | < 1 % (load change, static 10% ... 90%) |
| < 2 % (load change, dynamic 10% ... 90%) | |
| < 0.1 % (the input voltage varies by ±10%) | |
| Residual wave | < 50 mV SS (rated value) |
| Output Power | 240 W |
| Typical response time | < 0.15 s |
| Maximum idle power consumption | 9.1 W |
| Maximum rated load power loss | 22 W |
Overview
| net weight | 1.1 kg |
|---|---|
| effectiveness | > 92.5 % (230V AC and rating) |
| Insulation voltage input / output | 4 kV AC (type test) |
| 2 kV AC (conventional test) | |
| Insulation voltage input / PE | 3.5 kV AC (type test) |
| 2 kV AC (conventional test) | |
| Insulation voltage output / PE | 500 V DC (conventional test) |
| Protection level | I |
| MTBF (IEC 61709, SN 29500) | > 940000 h (25 °C) |
| > 530000 h (40 °C) | |
| > 230000 h (60°C) | |
| Installation location | Horizontal DIN rail NS35, EN60715 |
| Assembly instructions | Can be installed side by side; horizontal spacing 5 mm, 15 mm for active components, 50 mm vertical spacing |
Connect data, input
| Connection method | Pluggable screw connection |
|---|---|
| Minimum cross section of rigid wire | 0.2 mm2 |
| Maximum cross section of rigid wire | 2.5 mm2 |
| Flexible wire minimum cross section | 0.2 mm2 |
| Maximum cross section of flexible wire | 2.5 mm2 |
| Minimum wire cross section AWG | 16 |
| Maximum wire cross section AWG | 12 |
| Stripping length | 7 mm |
| Thread | M3 |
Connection data, output
| Connection method | Pluggable screw connection |
|---|---|
| Minimum cross section of rigid wire | 0.2 mm2 |
| Maximum cross section of rigid wire | 2.5 mm2 |
| Flexible wire minimum cross section | 0.2 mm2 |
| Maximum cross section of flexible wire | 2.5 mm2 |
| Minimum wire cross section AWG | 16 |
| Maximum wire cross section AWG | 12 |
| Stripping length | 7 mm |
| Thread | M3 |
Signal display connection data
| Minimum cross section of rigid wire | 0.2 mm2 |
|---|---|
| Maximum cross section of rigid wire | 2.5 mm2 |
| Flexible wire minimum cross section | 0.2 mm2 |
| Maximum cross section of flexible wire | 2.5 mm2 |
| Minimum wire cross section AWG | 16 |
| Maximum wire cross section AWG | 12 |
| Thread | M3 |
Standards and specifications
| Electromagnetic compatibility | Comply with the 2014/30/EU Electromagnetic Compatibility Directive |
|---|---|
| electric shock | 18 ms, 30 g, in each spatial direction (according to IEC 60068-2-27) |
| Emission interference | EN 55011 (EN 55022) |
| Anti-interference | EN 61000-6-2:2005 |
| Connection meets standards | CSA |
| Standard / procedure | EN 61000-4-2 |
| Contact discharge | 4 kV (strength test 2) |
| Standard / procedure | EN 61000-4-3 |
| Frequency Range | 80 MHz ... 1 GHz |
| Test field strength | 10 V/m (strength test 3) |
| Frequency Range | 1.4 GHz ... 2 GHz |
| Test field strength | 3 V/m (strength test 2) |
| Standard / procedure | EN 61000-4-4 |
| Remarks | Standard B |
| Standard / procedure | EN 61000-4-5 |
| signal | 1 kV (strength test 2 - asymmetric) |
| Standard / procedure | EN 61000-6-3 |
| EN 61000-4-6 | |
| Frequency Range | 0.15 MHz ... 80 MHz |
| Voltage | 10 V (strength test 3) |
| Standard - Electrical Safety | IEC 60950-1/VDE 0805 (SELV) |
| Standard - electronic equipment used in power installation and assembly of electronic equipment in power installation | EN 50178/VDE 0160 (PELV) |
| Standard - safe ultra low voltage | IEC 60950-1 (SELV) and EN 60204-1 (PELV) |
| Standard - safety insulation | DIN VDE 0100-410 |
| Standard - main co-wave current limit | EN 61000-3-2 |
| Standard - Equipment Safety | BG (design test) |
| Standard - for medical certification | IEC 60601-1, 2 x MOOP |
| Shipbuilding industry license | Germanischer Lloyd (EMC 1), ABS, LR, RINA, NK, DNV, BV |
| UL certification | UL, UL 508 |
| UL/C-UL certified UL 60950-1 | |
| UL ANSI/ISA-12.12.01 Class I, Class II, Groups A, B, C, and D (Hazardous Areas) | |
| DeviceNet certification | DeviceNetTM Power Compliance Test |
| Vibration (operation) | < 15 Hz, amplitude ± 2.5 mm (according to IEC 60068-2-6) |
| 15 Hz ... 150 Hz, 2.3 g, 90 min. | |
| Low voltage command | Comply with LV Regulation 2006/95/EC |
| Certification - for the needs of the semiconductor industry, in line with the mains pressure drop | SEMI F47-0706 Certificate of Conformity |
| Information Technology Equipment - Security (CB Certification System) | CB certification |
| Track application | EN 50121-4 |
| Surge voltage category (EN 62477-1) | III |
-
- Mạch điều khiển cho van actuator GAMX-TD518S Electric actuator control board GAMX-S518S GAMX-L1840 Liên hệ
-
- Mạch điều khiển cho van actuator JD-6188M Intelligent Control Module Electric Actuator Controller Liên hệ
-
- Mạch điều khiển cho van actuator BND-DZ Intelligent Electric Actuator Intelligent Control Module Liên hệ
TÂN THÀNH CAM KẾT
- Sản phẩm, hàng hóa chính hãng.
- Giá cả cạnh tranh.
- Dịch vụ chăm sóc khách hàng tận tâm.
Thông Tin Công Ty
Chính sách và quy định
Đã thông báo
Hỗ trợ khách hàng
THÔNG TIN LIÊN HỆ:
-------------------------------
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
Kinh doanh 1 : 0816.861.515
Kinh doanh 2 : 0836.861.515
Email: tthkinhdoanh@gmail.com
Email: tthkinhdoanh01@gmail.com
