Đồng hồ hiển thị kỹ thuật số TM0200 Đồng hồ đo độ rung trục TM0200-A00-B01 PROVIBTECH

TM0200 display meter digital display meter series is a display matched with TM series transmission protection meter. The display can display the measurement parameters of various TM meters. TM0200 adopts LED display, which can clearly display the monitoring value in the control room, on-site or at night.

Common models of TM0200 display meter digital display meter :

TM0200-A00-B00

TM0200-A00-B01

TM0200-A01-B01

TM0200-A02-B01

Flexible configuration and field adjustment

TM0200 display table gives customers a simple interface and fully programmable system configuration and calibration on site. Open the front cover of the display, you can see two adjustable potentiometers, which are used to adjust the zero point and full scale respectively, and the display can be easily calibrated on site. In addition, pull out the internal circuit board, and through different jumpers, you can change the displayed full scale and input mode.

Connection of multiple loads

Since the internal resistance of TM0200 is very small, and the display is completely suspended relative to the ground, it can be connected in series with any load (such as PLC or DCS) to the 4-20mA output of the TM transmission protection meter. The 4-20mA of one TM meter can display the monitoring value in TM0200 and the host computer at the same time.

Technical indicators

Electrical indicators:

Accuracy:

         ±0.5%FS ±2Digital.

A/D conversion:

       Double integral.

Sampling speed:

       3.0/s.

responding speed:

         4.5s.

4-20mA input resistance:

         <20Ω.

Maximum display:

         -1999~9999.

Insulation resistance:

         DC 500V > 1000MΩ.

power supply:

220VAC, 110VAC, 50mA.

output:

24VDC, 50mA Max.

Power consumption:

    less than 5W

Physical indicators:

Operating temperature:

         0PoP ~ 50PoPC.

Dimensions:

         48(H)×96(W)×112(D)mmP3P.

weight:

         250g.