Biến tần T-Verter N2-203-H ,Taian N2 inverter 2.2KW 220V N2-203-H (3HP) Brand new unpackaged

Đăng ngày 16-09-2018 11:58:13 PM - 1104 Lượt xem

Mã sản phẩm: N2 inverter 2.2KW 220V N2-203-H (3HP)

Taian N2 inverter 2.2KW 220V N2-203-H (3HP) Brand new unpackaged
Taian N2 Inverter : Universal
rated voltage, power range:
220V single / three phase (0.4KW-22KW)
380V three-phase (0.75KW-22KW)
Features:
· Small size, low noise
· All areas detection protection
· 8-speed control and 7-stage programmable repeat operation
· With RS232/RS485 communication function
· CE/UL/cUL/Ctick certification pass
· NEMA4 protection grade (ordered product)

Tình trạng sản phẩm:

TECO Taian inverter S310 replaces E2
TECO Taian inverter N310 replaces N2
TECO Taian inverter T310 replaces N310

General specifications:

Inverter model N2-□□□-××		2P5	201	202	203	205	208	210	215	220	230
Horsepower (HP)		0.5	1	2	3	5	7.5	10	15	20	30
Applicable motor capacity KW		0.4	0.75	1.5	2.2	3.7	5.5	7.5	11	15	twenty two
Rated current A		3.1	4.5	7.5	10.5	17.5	26	35	49	64	87
Rated capacity KVA		1.2	1.7	2.9	4.0	6.7	9.9	13.3	18.7	24.4	87
Weight (Kg)		1.4	1.4	2.5	4.0	4.0	6.8	7.1	11.3	11.7	33.2
Allow instantaneous stop time (seconds)		1.0	1.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0
Input voltage (50/60Hz±5%)		Single-phase or three-phase 200~240V 10%, 50/60HZ 5%, 205 (inclusive) or more for three-phase input
The output voltage		Three-phase 200~240V (corresponding to input voltage)
control method		Approximate sine wave PWM control
Inverter model N2-□□□-××		401	402	403	405	408	410	415	420	430
Horsepower (HP)		1	2	3	5	7.5	10	15	20	30
Applicable motor capacity KW		0.75	1.5	2.2	3.7	5.5	7.5	11	15	twenty two
Rated current A		2.3	3.8	5.2	8.8	13	17.5	25	32	48
Rated capacity KVA		1.7	2.9	4.0	6.7	9.9	13.3	19.1	24.4	36.6
Allow instantaneous stop time (seconds)		1.0	1.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0
Weight (Kg)		2.4	2.5	3.8	4.0	7.0	7.3	12.3	12.5	13.5
Input voltage (50/60Hz±5%)		Three-phase 380 ~ 480V ± 10%
The output voltage		Three-phase 380 ~ 480V (corresponding to input voltage)
control method		Approximate sine wave PWM control
The frequency of the control system	range	0.1～400Hz
	Precision	Digital formula: 0.01% (-10 ~ 40 °C); analog: 0.4% (25 10 ° C)
	Set resolution	Digital type: 0.01Hz (Note 1); Analog: 0.06Hz / 60Hz
	Output resolution	0.01Hz
	Keyboard frequency setting method	Can be set directly with ▲▼ or with the knob (VR) on the keyboard.
	External signal setting method	1. External variable resistor / 0-5V / 0-10V / 0-20mA / 5-0V / 10-0V / 20-0mA 2. With the terminal block (TM2) multi-function contact for rise / fall control or speed Control or program automatic control
	Other functions	Frequency upper/lower limit, starting frequency, three-stage skip frequency can be set individually
A general control system	Carrier frequency	1-12KHz
	Acceleration and deceleration control	2-stage acceleration/deceleration time (0.1-3600 seconds) and 2-segment S-curve
	Voltage/frequency curve	1 programmable curve, 18 fixed curves
	Torque control	Torque boost level can be set
	Multi-function input	16 functions, 32 options
	Multi-function output	6 functions, 12 options
	Other functions	Automatic voltage adjustment (AVR), slip compensation, deceleration stop or natural stop, automatic reset and restart, brake frequency / voltage / time can be activated by SPESESEARCH or general mode, 3 WIRE operation control.
Protective function		Overload protection, over voltage, under voltage, instantaneous power failure restart, acceleration/deceleration/running stall prevention; inverter output short circuit protection, initial ground protection + zero phase CT protection, heat sink overheat protection; over torque detection, fault Contact control, reverse limit, direct start and fault reset after power on, parameter lock
Operating keyboard		Can display frequency / speed / line speed / DC voltage / output voltage / current / inverter steering / inverter parameters / fault record / program version
Communication control		1. Can communicate by RS232 or RS485 (need to be used with accessories) 2. Can be used for 1 to 1 or 1 to many (RS485)
Operating temperature		-10～40°C
humidity		0 to 95% relative humidity (no condensation)
vibration		Below 0.5G
LVD specification		EN50178
Protection level		IP 20/NEMA4 (10Hp (inclusive) below)
Security Level		UL 508C
Note 1: The resolution above 100Hz is 0.1Hz when controlled by the operation panel; when it is controlled by computer (PC) or programmable controller (PLC), it can be up to 0.01Hz Note 2:200V level N2-205 (including ) No EMC specifications above

: Tủ Mạng 6U-D400, Tủ Rack 6U-D400, PicoLink PL6U-D400 Liên hệ

: Tủ Mạng 6U-D500, Tủ Rack 6U-D500, Picolink PL6U-D500 Liên hệ

: Tủ Mạng 10U-D500, Tủ Rack 10U-D500, PicoLink PL10U-D500 Liên hệ

: Tủ Mạng 10U-D600, Tủ Rack 10U-D600, PicoLink PL10U-D600 Liên hệ

: Tủ Mạng 12U-D600, Tủ Rack 12U-D600, Picolink PL12U-D600 Liên hệ

: Tủ Mạng 12U-D800, Tủ Rack 12U-D800, Picolink PL12U-D800 Liên hệ

: Tủ Mạng 15U-D600, Tủ Rack 15U-D600, Picolink PL15U-D600 Liên hệ

: Tủ Mạng 15U-D800, Tủ Rack 15U-D800, Picolink PL15U-D800 Liên hệ

: Tủ Mạng 15U-D1000, Tủ Rack 15U-D1000, Picolink PL15U-D1000 Liên hệ

: Tủ Mạng 20U-D600, Tủ Rack 20U-D600, Picolink PL20U-D600 Liên hệ

: Tủ Mạng 20U-D800, Tủ Rack 20U-D800, Picolink PL20U-D800 Liên hệ

: Tủ Mạng 20U-D1000, Tủ Rack 20U-D1000, Picolink PL20U-D1000 Liên hệ

: Cảm biến từ Turck NI4-M12-AP6X Liên hệ

TÂN THÀNH CAM KẾT

Sản phẩm, hàng hóa chính hãng.
Giá cả cạnh tranh.
Dịch vụ chăm sóc khách hàng tận tâm.

Thông Tin Công Ty

Giới thiệu về chúng tôi

Chính sách và quy định

Đã thông báo

Hỗ trợ khách hàng

THÔNG TIN LIÊN HỆ:
-------------------------------
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
Kinh doanh 1 : 0816.861.515
Kinh doanh 2 : 0836.861.515
Email: tthkinhdoanh@gmail.com
Email: tthkinhdoanh01@gmail.com

Biến tần T-Verter N2-203-H ,Taian N2 inverter 2.2KW 220V N2-203-H (3HP) Brand new unpackaged

TÂN THÀNH CAM KẾT

Kết nối với chúng tôi