Bộ hiển thị điều khiển áp suất, GEFRAN pressure controller 2500-1-1-0-0-0-1, 2500-1-1-0-0-2-1 Bộ hiển thị điều khiển áp suất, GEFRAN pressure controller 2500-1-1-0-0-0-1, 2500-1-1-0-0-2-1 GEFRAN 2500 high-precision pressure closed-loop controller, also known as pressure regulator, controller size is 96X96mm. The degree of protection is IP54 waterproof and dustproof. The panel is designed with a 6-button design and is easy to use. The first row is used for the current actual pressure, the second row is the pressure set point, the process value, and the third row is the control power. The left and right sides of the meter are displayed with columns in the column to judge the power, control deviation, relay alarm status and other information. GEFRAN 2500 Pressure Closed Loop Control Configurable Remote Setpoint Adjustment, External Switch Control Manual/Automatic Control Conversion, External Analog Input Control Manual Mode Power. More functions can be consulted our customer service, GEFRAN 2500 pressure closed-loop controller, mainly used in plastic extruder pressure closed-loop control, extrusion and injection pressure control, differential pressure control, textile, paper, plastic film production line strength control, Winding tension control. There are two logic outputs that can be set to the following different functions: Alarm Memory Reset, Endpoint Memory Reset, Calibration, Setpoint Remote Control, Hold, or keyboard input settings. The instrument can perform the following memory functions: maximum endpoint value, minimum endpoint level, endpoint value, etc. Two other optically isolated analog outputs are used to control signal output as well as input signals, remote setpoints, peaks, and more. • Tension meter, potentiometer, linear signal, TC, RTD2 group configurable input
• 2 auxiliary analog inputs 
• Differential measurement 
• High precision: 0.1 % fs ± 1 digit 
• 6-wire tensiometer automatic calibration check 
• Transmitter power supply and tension meter probe power supply 
• PID control with 8 sets of optional parameters

• 3-way configurable alarm, fault protection 
• Controller and repeater up to 3 insulated analog outputs 
• 4-digit digital inputs 
• 4 relay outputs with configurable functions 
• Extended band 4 configurable digital inputs and outputs 
• Serial communication interface: RS485/RS 232 MODBUS RTU protocol 
• Panel with 3 columns of 5-digit display and 2 bar graphs          

TYPE: 1101-V-2R-0-1 M82 
DES. M.12
SUPPLY: 100-240VAC 50/60HZ 6VA
MAT. 00466222                                                                                                                             
Model: LT / PC / PK / PA1 / PY1 / ​​PY2 / PY3 / PZ12 / PZ34 / PME12 / PMI12 / PMA12 / IC / PCIR / PCIR101 / PCIR102
2500-1-1-0-0-0-1, 2500-1-1-0-0-2-1 Thiết bị đo lường, bảo vệ Số lượng: 0 cái


  •  
  • Bộ hiển thị điều khiển áp suất, GEFRAN pressure controller 2500-1-1-0-0-0-1, 2500-1-1-0-0-2-1

  • Đăng ngày 23-08-2019 03:45:37 AM - 52 Lượt xem
  • Mã sản phẩm: 2500-1-1-0-0-0-1, 2500-1-1-0-0-2-1
  • Giá bán: Liên hệ
  • GEFRAN 2500 high-precision pressure closed-loop controller, also known as pressure regulator, controller size is 96X96mm. The degree of protection is IP54 waterproof and dustproof. The panel is designed with a 6-button design and is easy to use. The first row is used for the current actual pressure, the second row is the pressure set point, the process value, and the third row is the control power. The left and right sides of the meter are displayed with columns in the column to judge the power, control deviation, relay alarm status and other information. GEFRAN 2500 Pressure Closed Loop Control Configurable Remote Setpoint Adjustment, External Switch Control Manual/Automatic Control Conversion, External Analog Input Control Manual Mode Power. More functions can be consulted our customer service, GEFRAN 2500 pressure closed-loop controller, mainly used in plastic extruder pressure closed-loop control, extrusion and injection pressure control, differential pressure control, textile, paper, plastic film production line strength control, Winding tension control. There are two logic outputs that can be set to the following different functions: Alarm Memory Reset, Endpoint Memory Reset, Calibration, Setpoint Remote Control, Hold, or keyboard input settings. The instrument can perform the following memory functions: maximum endpoint value, minimum endpoint level, endpoint value, etc. Two other optically isolated analog outputs are used to control signal output as well as input signals, remote setpoints, peaks, and more. • Tension meter, potentiometer, linear signal, TC, RTD2 group configurable input
    • 2 auxiliary analog inputs 
    • Differential measurement 
    • High precision: 0.1 % fs ± 1 digit 
    • 6-wire tensiometer automatic calibration check 
    • Transmitter power supply and tension meter probe power supply 
    • PID control with 8 sets of optional parameters

    • 3-way configurable alarm, fault protection 
    • Controller and repeater up to 3 insulated analog outputs 
    • 4-digit digital inputs 
    • 4 relay outputs with configurable functions 
    • Extended band 4 configurable digital inputs and outputs 
    • Serial communication interface: RS485/RS 232 MODBUS RTU protocol 
    • Panel with 3 columns of 5-digit display and 2 bar graphs          

    TYPE: 1101-V-2R-0-1 M82 
    DES. M.12
    SUPPLY: 100-240VAC 50/60HZ 6VA
    MAT. 00466222                                                                                                                             
    Model: LT / PC / PK / PA1 / PY1 / ​​PY2 / PY3 / PZ12 / PZ34 / PME12 / PMI12 / PMA12 / IC / PCIR / PCIR101 / PCIR102


6e0aefa6b8ab5ff506ba

LT :
广泛 Widely used in injection molding, machine tools and machining industries
无限 Unlimited resolution
行程 Itinerary: 50 to 900mm
⊙ Independent linearity: ±0.05%
位移 Displacement speed: 5m/s, 10 m/s optional
⊙ Working temperature: -30 to +100 ° C
多种 Multiple electrical connections
⊙ Protection level: IP60 (IP65 optional)
  LT displacement sensor
PC :
⊙ Itinerary: 50 to 750mm
使用寿命 Service life: >100 million times or >25×1000000 meters
⊙ Mechanically fixed and use double bead self-aligning connection
⊙Maximum angular displacement exceeds ±30o
无限 Unlimited resolution
⊙ Independent linearity ± 0.05%
⊙ displacement rate up to 5m / s
⊙ Working temperature: -30 to +100 ° C
⊙ Protection level: IP65
  PC displacement sensor
PK :
⊙ Itinerary: 100 to 2000mm
⊙Using M5 threaded mechanical connection
无限 Unlimited resolution
⊙ Independent linearity ± 0.05%
⊙ Working temperature: -30 to +100 ° C
使用寿命 Service life: >100 million times or >25×1000000 meters
⊙ Protection level: IP40
  PK displacement sensor
PA1 :
⊙ Travel: 25 to 150mm
⊙ Mechanical connection with M4 thread
⊙ Unlimited resolution
⊙ Independent linearity ± 0.05%
⊙ displacement rate up to 5m / s
⊙ Working temperature: -30 to +100 ° C
使用寿命 Service life: >100 million times or >25×1000000 meters
⊙ Protection level: IP40
PA1 displacement sensor
PY1 :
⊙ Travel: 25 to 150mm
⊙ Mechanical connection with M4 thread
⊙ Unlimited resolution
⊙ Independent linearity ± 0.05%
⊙ Displacement rate up to 10m/s
⊙ Working temperature: -30 to +100 ° C
使用寿命 Service life: >100 million times
Two-way support for the joystick
⊙ Protection level: IP40
  PY1 displacement sensor
PY2 :
⊙ Widely used in injection molding, machine tools, painting and machining industries
⊙ Itinerary: 10 to 100mm
Bidirectional support and return spring for the lever
⊙ top with M2.5 thread and stainless steel ball
⊙ Unlimited resolution
⊙ Displacement rate up to 10m/s
⊙ Working temperature: -30 to +100 ° C
⊙Life: >100 million times
⊙ Protection level: IP40
  PY2 displacement sensor
PY3 :
⊙ Widely used in injection molding, machine tools, painting and machining industries
⊙ Itinerary: 10 to 50mm
Bidirectional support and return spring for the lever
⊙ top with M2.5 thread and stainless steel precision bearing
⊙ Independent linearity up to ±0.1%
⊙ Unlimited resolution
⊙ Displacement rate up to 10m/s
⊙ Working temperature: -30 to +100 ° C
⊙Life: >100 million times
⊙ Protection level: IP40
  PY3 displacement sensor
PZ12 :
⊙ Widely used in injection molding, machine tools, painting and machining industries
⊙Travel: 25 to 250mm
机械Using brackets, self-aligning ball, flange for mechanical fixing
⊙ Independent linearity ± 0.05%
⊙ Unlimited resolution
⊙Lifetime>100 million times or >25×1000000 meters
⊙ Protection level: IP60
  PZ12 displacement sensor
PZ34 :
⊙ Itinerary: 25 to 300mm
机械Using brackets, self-aligning ball, flange for mechanical fixing
⊙ Independent linearity ± 0.05%
⊙ Unlimited resolution
⊙ Displacement rate up to 10m/s
⊙Lifetime>100 million times or >25×1000000 meters
⊙ Working temperature: -30 to +100 ° C
⊙ Protection level: IP60
  PZ34 displacement sensor
PME12 : Reluctance linear displacement sensor
⊙Typical application: a wet or temporarily submerged environment
⊙ Itinerary: 50~1000mm
⊙Linear displacement sensor unobstructed shaft
The magnetic pointer replaces the resistance axis used by conventional sensors, so the overall size is smaller.
⊙Protection rating: IP67 is completely waterproof
  PME12 displacement sensor
PMI12 : Reluctance linear displacement sensor
⊙Typical application: It can be used in high pressure applications (static pressure 250bar, maximum 400bar) such as: hydraulic cylinder
⊙ Itinerary: 50~1000mm
⊙Linear displacement sensor unobstructed shaft
⊙Protection level: IP68 is completely waterproof
  PMI12 displacement sensor
PMA12 : Reluctance linear displacement sensor
⊙Typical application: a wet or temporarily submerged environment
⊙ Itinerary: 50~1000mm
⊙ pointer magnetoresistance
⊙Mechanical anchoring and automatic alignment double bead rolling connection
⊙ Independent linearity ± 0.05%
⊙ Unlimited resolution
⊙Electrical connection: flexible polyurethane shielded cable output, 3 poles, 1m
⊙Lifetime>100 million times or >25×1000000 meters
⊙ Working temperature: -30 to +100 ° C
⊙ Protection level: IP67
  PMA12 displacement sensor
IC :
⊙ Itinerary: 100 to 550mm
机械 Mechanical fixing with internal or external flanges
⊙ Independent linearity up to ±0.1%
⊙ Displacement rate up to 1.5m/s
⊙Lifetime>100 million times or >25×1000000 meters
⊙ Working temperature: -30 to +100 ° C
⊙Maximum working pressure 340bar (5000 psi)
IC displacement sensor
PCIR : Signal Conditioner
⊙ High impedance input: >100Mohm
⊙Interface module integrated in the connector
⊙Standard output: 0~10V (PCIR, PCIR101)
⊙ standard output: 4 ~ 20mA (PCIR102)
⊙High linearity; low zero and full thermal drift
⊙ adjustable zero and full position
 PCIR: Signal Conditioner
PCIR101/PCIR102 : Signal Conditioner
⊙Interface module integrated in the connector
⊙Standard output: 0~10V (PCIR, PCIR101)
⊙ standard output: 4 ~ 20mA (PCIR102)
⊙High linearity; low zero and full thermal drift
⊙ adjustable zero and full
Sản phẩm cùng loại
Điều khiển nhiệt độ, Temperature Switch with Display HYDAC ETS1701-100-000

Điều khiển nhiệt độ, Temperature Switch...

HYDAC ETS1701-100-000

Giá bán: Liên hệ

Công tắc áp suất, Electronic Pressure Switch, HYDAC EDS 1791-N-016-000

Công tắc áp suất, Electronic Pressure...

EDS 1791-N-016-000

Giá bán: Liên hệ

Công tắc áp suất, Electronic Pressure Switch, HYDAC ETS1700 1701-100-Y00

Công tắc áp suất, Electronic Pressure...

ETS1700 1701-100-Y00

Giá bán: Liên hệ

Công tắc áp suất, Electronic Pressure Switch, HYDAC EDS 1700 1791-N-250-000

Công tắc áp suất, Electronic Pressure...

HYDAC EDS 1700 1791-N-250-000

Giá bán: Liên hệ

Cầu chì, BUSSMANN fuses 170M7118/7119/7120/7121/7122/7123/7124/7125

Cầu chì, BUSSMANN fuses...

170M7118/7119/7120/7121/7122/7123/7124/7125

Giá bán: Liên hệ

Cầu chì, Bussmann fuses 170M6188/6189/6190/6191/6192/6193/6194/6195

Cầu chì, Bussmann fuses...

170M6188/6189/6190/6191/6192/6193/6194/6195

Giá bán: Liên hệ

Cầu chì, Bussmann fuse 170M6651 1400A 1100V aR 170M6648/6649/6650

Cầu chì, Bussmann fuse 170M6651 1400A...

170M6651 1400A 1100V aR 170M6648/6649/6650

Giá bán: Liên hệ

 
Liên hệ
  • Phòng kinh doanh
  • phonesp091.686.1515
  • phonesp081.686.1515
  • phonesp091.797.1515
  • phonesp083.797.1515
  • phonesptanthanhdigitech@gmail.com
-
 
  • Phòng kỹ thuật
  • phonesp0912.969.391
  • phonesp081.686.1515
  • phonesptanthanhdigitech@gmail.com
Google Map
Lượt truy cập
  • Đang truy cập14
  • Hôm nay4,642
  • Tháng hiện tại136,515
  • Tổng lượt truy cập1,727,318


THÔNG TIN THANH TOÁN

Bùi Mạnh Cường
STK : 0031000284789
Vietcombank - Chi Nhánh Hải Phòng
Bùi Mạnh Cường
STK : 79868269
Ngân hàng ACB Chi nhánh Trần Nguyên Hãn- TP Hải Phòng
Công ty TNHH Công  nghệ số Tân Thành
STK : 0031000290374
Vietcombank - Chi Nhánh Hải Phòng

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Nguyễn Thị Hồng Nhung
STK : 0031000878687
Vietcombank - Chi Nhánh Hải Phòng

Nguyễn Thị Hồng Nhung
STK : 108006540400
Vietinbank- Chi Nhánh Hải Phòng
Nguyễn Thị Hồng Nhung
STK : 113375269
ACB - Chi Nhánh Hải Phòng
 
 
Trụ sở: số 189, Nguyễn Văn Linh, P. Kênh Dương, Q.Lê Chân, TP Hải Phòng
VPGD: Số 165-Thiên Lôi, P Vĩnh Niệm, Q Lê Chân. TP Hải Phòng
VPĐD: Số 191- P Chùa Láng. Q Đống Đa. TP Hà Nội
Tel: 0225.8830.305  Fax: 0225.8830.305

Bản quyền © 2018-2019 thuộc về tanthanh-automation.com

Ghi rõ nguồn khi sử dụng các thông tin tại WWW.TANTHANH-AUTOMATION.COM.

CÔNG TY TNHH CÔNG NGHỆ SỐ TÂN THÀNH
GPKD số 0201787027 do Sở KH và ĐT TP Hải Phòng cấp ngày 17/08/2017– GĐ/Sở hữu website Bùi Mạnh Cường
Địa Chỉ: Số 189 Nguyễn Văn Linh , P. Kênh Dương, Q. Lê Chân , Tp. Hải Phòng
bct
1. Chính sách quy định chung - 2. Chính sách bảo mật thông tin

Chat Zalo
Chat Facebook
vinades
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây