- Bộ lập trình PLC, cáp lập trình
- Màn hình HMI
- Cảm biến, phụ kiện
- Biến tần, khởi động mềm
- Máy cắt, Aptomat, khởi động từ
- Thiết bị đo lường, bảo vệ
- Thiết bị công nghiệp, tự động hóa
- Thủy lực, khí nén, van công nghiệp
- Motor, Servo motor, Servo Amplifier
- Thyristor, Module, SCR, SSR, Diode
- Phụ kiện tủ điện và vỏ tủ điện
- Cáp điện, ống bảo vệ cáp
- Thiết bị điện trung thế, truyền tải
- Thiết bị chống sét, kim thu sét
- Dụng cụ cầm tay, dụng cụ tool
- ATS, UPS, tụ bù, cuộn kháng
-
Thiết bị ngành xi măng, thép, nhiệt điện
-
Thiết bị thanh lí-hàng tháo máy
Bộ hiển thị cân UNIPULSE F372A/F600AT color screen force measurement controller instrument test scale
Bộ hiển thị cân UNIPULSE F372A/F600AT color screen force measurement controller instrument test scale
Tình trạng sản phẩm:
F377A
Color/touch type voltage and current output force measuring instrument
* Can be connected directly to voltage: &lusmn;10V, current: &lusmn;20mA
* Displays the elusive numerical change process through waveforms
* Accurately captures the holding function of the inflection point & determines whether it is qualified or not
* Two types of simultaneous holding Comparison, last measured value comparison, relative value comparison and other functions
* Compact DIN96 * High-speed digital processing
of 2000 times per second
2.
F331
DIN96×48 small force measuring instrument
* Convenient size DIN96×48 control panel that is easy to attach and detach
* Standard equipped with USB interface
* Dedicated computer application
* High-speed digital processing of 300 times per second
* Equivalent input correction function that inputs the rated value of the sensor for
correction
3.
F350
2ch input type force measuring instrument
* For the input value of resistance strain gauge sensor 2ch, it is possible to perform calculation and judgment output
* Calculation function (ch1+ch2, ch1-ch2, ch1-ch2, high-order selection, low-order selection)
* Judgment output with 9 points
* Each channel With a sampling speed of 3000 times per second
* Equivalent input correction function with input sensor rated value for correction
* Analog
input
F340A
Basic force measuring instrument
4. * High-speed analog peak hold function
* Digital zero point function to return the display value to zero with one touch
* Small DIN96
* High-speed upper and lower limit comparison function
* Equivalent input correction function with input sensor rated value for correction
5.
F325
Compatible with high-speed peak digital force measuring instruments
* High-speed analog peak hold function
* Digital peak/sample hold
* High-speed digital processing of 3000 times per second
* Standard combination with RS-485 (Modbus-RTU or UNIPULSE's original format) or SI/F (UNIPULSE's original development serial interface)
* Adopted Analog and digital technology equipped with high-performance filters
* PC software
settings
6.
F381A
LCD touch force measuring instrument with waveform comparison function (SD card storage function can be added)
* Waveform comparison function (the set waveforms of the upper and lower limits are compared with the actual measured waveforms in sequence)
* Type hold function (the measurement interval can be divided, and the type of hold can be selected to compare the upper and lower limits)
* Displacement input is standard configuration (by performing force -Two input methods of displacement enable 2D waveform comparison)
* Measured values or setting parameters are stored in the SD card
* Touch screen makes setting operations simple and easy
* +COM/-COM shared, Sink Type / Source Type selectable
* 4000 times per second high-speed digital
processing
7.
F388A
Equipped with waveform comparison function, voltage and current output force measuring instrument (SD card storage function can be added)
* Can be directly connected to voltage: &lusmn;10V, current: &lusmn;20mA
* Waveform comparison function (upper and lower limit set waveforms and actual measured waveforms are compared sequentially)
* Type hold function (measurement intervals can be divided and the type of hold can be selected Compare the upper and lower limits)
* The measured values or setting parameters are stored in the SD card
* The touch screen makes the setting operation simple and easy
* +COM/-COM is shared, and the Sink Type / Source Type can be selected
* Each High-speed digital
processing 4,000 times per second
8.
F130
Force measuring module for OMRON SYSMAC CJ1/CJ2/NJ
* Can be directly connected to SYSMAC CJ1/CJ2/NJ
* High-speed sampling speed of 3000 times per second
* CJ1/CJ2/NJ and F130 can communicate freely
* Can shorten the system development time and make system maintenance, management and transformation simple
*Simplified wiring between instruments, saving costs
THÔNG TIN THANH TOÁN
| |||||||||
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
TÂN THÀNH CAM KẾT
- Sản phẩm, hàng hóa chính hãng.
- Giá cả cạnh tranh.
- Dịch vụ chăm sóc khách hàng tận tâm.
Thông Tin Công Ty
Chính sách và quy định
Đã thông báo
Hỗ trợ khách hàng
THÔNG TIN LIÊN HỆ:
-------------------------------
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
Kinh doanh 1 : 0816.861.515
Kinh doanh 2 : 0836.861.515
Kinh doanh 3 : 0926.511.515
Kinh doanh 4 : 0916.861.515
Kinh doanh 5 : 0888.868.515
Kinh doanh 6 : 0917.971.515
Website: http://tanthanh-automation.com
Website: http://thietbitudongtanthanh.com
Website: http://diencongnghieptanthanh.com
Email: tthkinhdoanh@gmail.com
Email: tthkinhdoanh01@gmail.com
