1. Product introduction
Universal weight transmitter controller is a transmitter display controller for industrial control field. It integrates weight display, analog signal output, Modbus-RTU communication, large-screen communication, switch input, and relay output. Adopt high-speed 24-bit Σ-Δ A/D converter, 16-bit D/A converter, and all interfaces are processed by photoelectric isolation.
Fully consider the complexity of electromagnetic interference in industrial sites , carefully design software and hardware, and are suitable for industrial applications in building materials, chemical, food, metallurgy and other industries.
1.1 Main features
⚫ Built-in anti-EMC interference circuit, strong anti-electromagnetic interference ability, stable data, suitable for industrial applications.
⚫Three calibration methods: weight calibration, calibration parameter modification, sensitivity input calibration (weightless calibration).
⚫Choose RS232 or RS485 two ways, support Modbus-RTU communication multi-word continuous read and write function.
⚫The analog output type can be set: 0~20mA, 4~20mA, 0~5V or 0~10V.
⚫The relay output mode can be set: sorting, fixed value, quantitative, decrement, batching, peak value and other modes.
⚫ Supports automatic start of jog feeding when the actual feeding weight is out of tolerance.
⚫ Support the host computer to calibrate the controller.
⚫ The number of cycle batching can be set, and the function of infinite cycle batching is supported.
⚫ The batching times accumulation function, the actual batching weight reading function from the upper computer.
⚫ Supports a series of operations such as zero setting, tare removal, batching start and stop by the host computer.
⚫ Stainless steel anti-corrosion panel, all-metal shielded shell.
⚫ 24BIT -△ type A/D conversion, maximum number of A/D pulses: 1,000,000.
⚫ AD rate optional: 15 times/sec, 30 times/sec, 60 times/sec, 100 times/sec, 200 times/sec.
⚫Three calibration methods: weight calibration, calibration parameter modification, sensitivity input calibration (weightless calibration).
⚫ 7-digit 0.56-inch LED digital tube display, 10-segment light bar indication, 7 LED indicators.
1.2 Technical parameters
⚫ Excitation voltage: 5.0VDC, can drive 8 analog sensors of 350 . ⚫ Range Signal range: 1.5~40mV. ⚫Zero signal range: -40~38.5mV. ⚫ Analog current output: Max 500Ω. ⚫ Analog voltage output: Min 10 KΩ. ⚫Relay contact capacity: AC 3A/250V, DC 3A/30V. ⚫The highest sensitivity: 0.3uV/d. ⚫ Nonlinear: better than 0.01% FS. ⚫ Power supply voltage range: AC 200~242V, frequency 49~51Hz, maximum power consumption 8 watts. The controller needs a good ground wire, and cannot share a power supply with devices that are prone to power noise, such as motors, relays, or heaters.
2. Related products