Công tắc giật dây, công tắc giật dây dừng băng tải 2 hướng, bidirectional balance rope switch HFKLT2-P-I, HFKLT2-P-II

Structural features
● The switch is a closed, anti-corrosion cast aluminum enclosure with an IP65 protection rating . It can be used for a long time in harsh working environments.
● Universal installation design makes the cable switch can be installed on the top of the side member of the conveyor or on both sides.
● Integral cover plate, so as to adjust and maintain the switch without removing the wire rod.
● Imported components are used in the machine, with large contact capacity, sensitive and reliable movement.
Fourth, technical parameters

 

 Five, scope of application                               
⊙Conventional belt conveyor
⊙Shuttle conveyor
⊙Skirt feed conveyor
Bucket elevator                                          
⊙Packing production line
⊙Stacking / reclaiming system, crane, excavator                   
Bow ship loading and unloading system
⊙Horizontal feeder
Use and installation                        
● The switch is installed on the fixed bracket of the rack in a balanced manner;                  
● Tie the steel wire rope to the pull rings at both ends, each measuring rope should not exceed 30M (it should be shortened when there is a steep slope)       
● The pull rope pressure should be appropriate to ensure the reliable reset of the switch;
● The pull rope is set in the parallel direction of the tape, and a lifting ring is added every 10M; the wire rope can be purchased by the factory according to the specifications required by the user.


HRLS-I
HRLS-II
HRLS-S
NST2-II
PMI
PMII
KLT2-1
KLT2-2
HFKLT1
HFKLT2
HFKLT1-1
HFKLT1-11
HFKLT1-I
HFKLT1-II
HFKLT2-I
HFKLT2-II
HFKLT2-1
HFKLT2-11
ELS-II
KLT2
HFKLT2
LS-I
LS-II
LLP6-1
LLP6-2
LSF-1
LSF-2
XLLS-I