Cảm biến tốc độ băng tải, công tắc tốc độ băng tải, công tắc báo trượt băng tải, Slip switch, Speed switch DH-SA,DH-T-S,DH-S, DH-X Cảm biến tốc độ băng tải, công tắc tốc độ băng tải, công tắc báo trượt băng tải, Slip switch, Speed switch DH-SA,DH-T-S,DH-S, DH-X

This product is suitable for detecting the slippage between the belt and the main roller during the operation of the belt conveyor to prevent the vicious accident caused by the slippage.
First, the main structure and characteristics
1, the product by the sensor head and the control box, the control box by the circuit board, panel, a display
, a micro-contact switch and terminal components.
2. A control box can detect the speed of two tapes.
(Note: You need to purchase another sensor head to realize this function.)
3. If you use one detection circuit, you can short the terminals 8 and 11 to achieve two outputs.
Second, installation instructions
The control box of this product should be installed on the belt conveyor frame or on the wall near the monitoring head (not more than 100 meters). The sensor head is installed on the belt under the belt conveyor and the belt runs smoothly. The sensor head is installed in contact type and non-contact type.
 

DH-SA Cảm biến trượt tốc độ băng tải Số lượng: 0 cái


  •  
  • Cảm biến tốc độ băng tải, công tắc tốc độ băng tải, công tắc báo trượt băng tải, Slip switch, Speed switch DH-SA,DH-T-S,DH-S, DH-X

  • Đăng ngày 12-12-2019 11:02:20 AM - 209 Lượt xem
  • Mã sản phẩm: DH-SA
  • Giá bán: Liên hệ
  • This product is suitable for detecting the slippage between the belt and the main roller during the operation of the belt conveyor to prevent the vicious accident caused by the slippage.
    First, the main structure and characteristics
    1, the product by the sensor head and the control box, the control box by the circuit board, panel, a display
    , a micro-contact switch and terminal components.
    2. A control box can detect the speed of two tapes.
    (Note: You need to purchase another sensor head to realize this function.)
    3. If you use one detection circuit, you can short the terminals 8 and 11 to achieve two outputs.
    Second, installation instructions
    The control box of this product should be installed on the belt conveyor frame or on the wall near the monitoring head (not more than 100 meters). The sensor head is installed on the belt under the belt conveyor and the belt runs smoothly. The sensor head is installed in contact type and non-contact type.
     


3. Technical indicators
● Testing belt speed range: 0 ~ 999 rpm / min ● Power consumption of the whole machine: 10W
● Working voltage: AC 220V 50HZ ● Contact capacity: 24 ~ 380V
4. Working principle
During the work of this product, When the power is turned on, the working lights 1 and 2 are turned on after a delay of 10 seconds. The relay does not operate. After the delay, the two speed sensors detect the speed signal, and then enter the control box. The belt speed sending display is also compared with the preset belt speed. When the belt speed is lower than the set value, the controller displays the belt speed and makes the corresponding relay send a signal. The belt slips; conversely, when the actual belt speed is higher than the set value, the controller enters normal work, and the corresponding indicator (green) lights up. The relay is released. Two output
V. maintenance and repair
When the controller is powered on, it enters the normal working state. When the programming key is pressed, it enters the programming state. At this time, the indicator on the left side of the panel shows the lowest bit flashing. This is to enter the modification state. Press the ↑ key to modify the position, and press the ← flashing bit to move to the left. The moving process is cyclic shift, and the modified value is 0 → 9 cyclic addition. After the modification is completed, the programming key must be pressed. This value is memorized by the microcomputer and at the same time enters another way to modify the set value. In the programming state, press the select key to enter the normal working state. In the normal working state, press the selection key to display the display of the other speed. (The power supply of the device should be synchronized with the belt conveyor. If no signal is detected within eight seconds after the device is powered on, it indicates slippage, otherwise a signal is detected and enters the normal start-up procedure to adapt. When the belt speed is greater than the set value, it enters the normal working state (If long-term electrification is required, the equipment contacts should be shielded in the program control room when the belt is started.)
(1) To ensure the reliable operation of the detector, the controller only displays the belt speed when the detector is connected to the power, and does not perform any processing. When running to normal speed, the work will be delayed. So don't test it after power on.
(2) The internal detection and control circuits of the detector are all integrated circuits, which greatly improves the detection accuracy and reliability of the detector, but it must work within the technical parameters during use.
(3) Regularly check the mounting screws of the sensor head, and there must be no looseness.

 Từ khóa: DH-SA
Liên hệ
  • Phòng kinh doanh
  • phonesp091.686.1515
  • phonesp081.686.1515
  • phonesp091.797.1515
  • phonesp083.797.1515
  • phonesptanthanhdigitech@gmail.com
-
 
  • Phòng kỹ thuật
  • phonesp0912.969.391
  • phonesp081.686.1515
  • phonesptanthanhdigitech@gmail.com
Google Map
Lượt truy cập
  • Đang truy cập14
  • Hôm nay5,119
  • Tháng hiện tại31,742
  • Tổng lượt truy cập3,045,144


THÔNG TIN THANH TOÁN

Bùi Mạnh Cường
STK : 0031000284789
Vietcombank - Chi Nhánh Hải Phòng
Bùi Mạnh Cường
STK : 79868269
Ngân hàng ACB Chi nhánh Trần Nguyên Hãn- TP Hải Phòng
Bùi Mạnh Cường
STK : 19035178267018  
Ngân hàng Techcombank- TP Hải Phòng

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Nguyễn Thị Hồng Nhung
STK : 0031000878687
Vietcombank - Chi Nhánh Hải Phòng

Nguyễn Thị Hồng Nhung
STK : 108006540400
Vietinbank- Chi Nhánh Hải Phòng
Nguyễn Thị Hồng Nhung
STK : 113375269
ACB - Chi Nhánh Hải Phòng
 
 
Trụ sở: số 189, Nguyễn Văn Linh, P. Kênh Dương, Q.Lê Chân, TP Hải Phòng
VPGD: Số 165-Thiên Lôi, P Vĩnh Niệm, Q Lê Chân. TP Hải Phòng
VPĐD: Số 191- P Chùa Láng. Q Đống Đa. TP Hà Nội
Tel: 0225.8830.305  Fax: 0225.8830.305

Bản quyền © 2018-2019 thuộc về tanthanh-automation.com

Ghi rõ nguồn khi sử dụng các thông tin tại WWW.TANTHANH-AUTOMATION.COM.

CÔNG TY TNHH CÔNG NGHỆ SỐ TÂN THÀNH
GPKD số 0201787027 do Sở KH và ĐT TP Hải Phòng cấp ngày 17/08/2017– GĐ/Sở hữu website Bùi Mạnh Cường
Địa Chỉ: Số 189 Nguyễn Văn Linh , P. Kênh Dương, Q. Lê Chân , Tp. Hải Phòng
bct
1. Chính sách quy định chung - 2. Chính sách bảo mật thông tin

Chat Zalo
Chat Facebook
vinades
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây