Biến trở, Cảm biến xoay liên tục 360 độ chính xác Sakae SFCP22E-1K 2K 5K 10K

Commonly used resistance: 1K 2K 5K 10K

Total resistance tolerance:
standard grade ±3% (H)
precision grade ±1% (F)
independent linearity tolerance:
standard grade ±0.5%
precision grade ±0.25%
(if it is lower than 1KΩ, it is ±0.35%)
power: 0.5W
Maximum working voltage: 250V
Electrical stroke: 355°±5°
Mechanical stroke: 360° (continuous rotation) Single turn with stop position
optional special specification
low resistance value (10Ω, 20Ω), additional terminal (up to 1 additional terminal ), front and rear shafts (rear shaft diameter 6mm, shaft length 20mm), multiple groups (up to ten groups) with stop position (rotation angle becomes 320°, stop pressure is 0.6N•m[6kgf•cm]), special Electrical travel, inch size bushing and shaft diameter (φ6.35mm), special processing on the shaft