- Bộ lập trình PLC, cáp lập trình
- Màn hình HMI
- Cảm biến, phụ kiện
- Biến tần, khởi động mềm
- Máy cắt, Aptomat, khởi động từ
- Thiết bị đo lường, bảo vệ
- Thiết bị công nghiệp, tự động hóa
- Thủy lực, khí nén, van công nghiệp
- Motor, Servo motor, Servo Amplifier
- Thyristor, Module, SCR, SSR, Diode
- Phụ kiện tủ điện và vỏ tủ điện
- Cáp điện, ống bảo vệ cáp
- Thiết bị điện trung thế, truyền tải
- Thiết bị chống sét, kim thu sét
- Dụng cụ cầm tay, dụng cụ tool
- ATS, UPS, tụ bù, cuộn kháng
-
Thiết bị ngành xi măng, thép, nhiệt điện
-
Thiết bị thanh lí-hàng tháo máy
BECKHOFF - EL1502
EL1502 | UP/DOWN COUNTER 24 V DC, 100 KHZ
The up/down counter counts binary pulses, and transmits the counter state, in an electrically isolated form, to the higher-level automation device. In the EL1502 EtherCAT Terminal it is possible to choose the (32 bits) counting direction using the up/down input, the gate connection can be used to control the triggering. Using the Clock1 input it is possible to implement two (32 bits) counters. The EtherCAT Terminal contains two inputs that indicate their signal state via LEDs. Both outputs are switched according to the counter state, so that they can be used as fast control signals for field devices.
The EL1502 device supports the distributed clocks function. This means that the counter can be read at constant intervals (DC precision << 1 µs).
| Technical data | EL1502 | ES1502 |
|---|---|
| Connection technology | 1 x up/down counter, 2 x up or down counter |
| Specification | EN 61131-2, type 1, “0”: < 5 V DC, “1”: > 15 V DC, typ. 5 mA |
| Number of counters | 1 or 2 |
| Nominal voltage | 24 V DC (-15 %/+20 %) |
| “0“ signal voltage | -3…+5 V |
| “1“ signal voltage | 15…30 V |
| Input current | typ. 5 mA |
| Counting frequency | max. 100 kHz |
| Distributed clocks | yes |
| Max. output current | 24 V/0.5 A (short-circuit-proof) per channel |
| Current consumption power contacts | typ. 14 mA + load |
| Current consumption E-bus | typ. 130 mA |
| Counter depth | 32 bit |
| Electrical isolation | 500 V (E-bus/field potential) |
| Bit width in the process image | 48 bit counter input, 48 bit counter output |
| Configuration | no address setting, configuration via the EtherCAT master |
| Special features | set counters, switch outputs |
| Weight | approx. 50 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Pluggable wiring | for all ESxxxx terminals |
| Approvals | CE, UL, Ex |
Tình trạng sản phẩm:
EL1502 | UP/DOWN COUNTER 24 V DC, 100 KHZ
The up/down counter counts binary pulses, and transmits the counter state, in an electrically isolated form, to the higher-level automation device. In the EL1502 EtherCAT Terminal it is possible to choose the (32 bits) counting direction using the up/down input, the gate connection can be used to control the triggering. Using the Clock1 input it is possible to implement two (32 bits) counters. The EtherCAT Terminal contains two inputs that indicate their signal state via LEDs. Both outputs are switched according to the counter state, so that they can be used as fast control signals for field devices.
The EL1502 device supports the distributed clocks function. This means that the counter can be read at constant intervals (DC precision << 1 µs).
| Technical data | EL1502 | ES1502 |
|---|---|
| Connection technology | 1 x up/down counter, 2 x up or down counter |
| Specification | EN 61131-2, type 1, “0”: < 5 V DC, “1”: > 15 V DC, typ. 5 mA |
| Number of counters | 1 or 2 |
| Nominal voltage | 24 V DC (-15 %/+20 %) |
| “0“ signal voltage | -3…+5 V |
| “1“ signal voltage | 15…30 V |
| Input current | typ. 5 mA |
| Counting frequency | max. 100 kHz |
| Distributed clocks | yes |
| Max. output current | 24 V/0.5 A (short-circuit-proof) per channel |
| Current consumption power contacts | typ. 14 mA + load |
| Current consumption E-bus | typ. 130 mA |
| Counter depth | 32 bit |
| Electrical isolation | 500 V (E-bus/field potential) |
| Bit width in the process image | 48 bit counter input, 48 bit counter output |
| Configuration | no address setting, configuration via the EtherCAT master |
| Special features | set counters, switch outputs |
| Weight | approx. 50 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Pluggable wiring | for all ESxxxx terminals |
| Approvals | CE, UL, Ex |
-
- BECKHOFF module KL3052 Liên hệ
-
- BECKHOFF END TERMINAL KL9010 Liên hệ
-
- BECKHOFF CTNET I/O BK7200 Liên hệ
TÂN THÀNH CAM KẾT
- Sản phẩm, hàng hóa chính hãng.
- Giá cả cạnh tranh.
- Dịch vụ chăm sóc khách hàng tận tâm.
Thông Tin Công Ty
Chính sách và quy định
Đã thông báo
Hỗ trợ khách hàng
THÔNG TIN LIÊN HỆ:
-------------------------------
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP TTH
Trụ sở: số 124 ngõ 79 Yên Hoà-Cầu giấy-HN
Kinh doanh 1 : 0816.861.515
Kinh doanh 2 : 0836.861.515
Email: tthkinhdoanh@gmail.com
Email: tthkinhdoanh01@gmail.com
