ABB CONTACTOR AF26Z-30-00-21 1SBL236001R2100

ABB AF26Z-30-00-21 24-60V50/60HZ 20-60VDC Contactor 1SBL236001R2100

• Number of Main Contacts NO:3
• Number of Main Contacts NC:0
• Number of Auxiliary Contacts NO:0
• Number of Auxiliary Contacts NC:0
• Standards:

IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1, UL 508, CSA C22.2 N°14

• Rated Operational Voltage:Main Circuit 690 V
• Rated Frequency (f):Main Circuit 50 / 60 Hz
• Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors q = 40 °C 50 A
• Rated Operational Current AC-1 (Ie):

(690 V) 40 °C 45 A
(690 V) 60 °C 40 A
(690 V) 70 °C 32 A

• Rated Operational Current AC-3 (Ie):

(220 / 230 / 240 V) 60 °C 26 A
(380 / 400 V) 60 °C 26 A
(415 V) 60 °C 26 A
(440 V) 60 °C 26 A
(500 V) 60 °C 23 A
(690 V) 60 °C 17 A

• Rated Operational Power AC-3 (Pe):

(220 / 230 / 240 V) 6.5 kW
(380 / 400 V) 11 kW
(400 V) 11 kW
(415 V) 11 kW
(440 V) 15 kW
(500 V) 15 kW
(690 V) 15 kW

• Rated Short-time Withstand Current (Icw):

at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 350 A
at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 50 A
at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 150 A
at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 700 A
at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 225 A

• Maximum Breaking Capacity:

cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 500 A
cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 200 A

• Maximum Electrical Switching Frequency:

AC-1 600 cycles per hour
AC-2 / AC-4 150 cycles per hour
AC-3 1200 cycles per hour

• Rated Insulation Voltage (Ui):

acc. to UL/CSA 600 V
acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 690 V

• Rated Impulse Withstand Voltage (Uimp):6 kV
• Maximum Mechanical Switching Frequency:3600 cycles per hour
• Rated Control Circuit Voltage (Uc):

50 Hz 24 ... 60 V
60 Hz 24 ... 60 V
DC Operation 20 ... 60 V

• Operate Time:

Between Coil De-energization and NC Contact Closing 13...98 ms
Between Coil De-energization and NO Contact Opening 11...95 ms
Between Coil Energization and NC Contact Opening 38...90 ms
Between Coil Energization and NO Contact Closing 40...95 ms

• Connecting Capacity Main Circuit:

Flexible with Insulated Ferrule 1x 1.5...10 mm²
Flexible with Insulated Ferrule 2x 1.5...4 mm²
Flexible with Ferrule 1/2x 1.5...10 mm²
Rigid 1/2x 2.5...10 mm²

• Connecting Capacity Control Circuit:

Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
Rigid 1/2x 1 ... 2.5 mm²

• Wire Stripping Length:

Control Circuit 10 mm
Main Circuit 14 mm

• Degree of Protection:

acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20

• Terminal Type:

Screw Terminals